52
VQT2J83
The images from this unit do not appear on the
television.
Picture is distorted.
¾
Make sure that the television is connected to HDMI AV OUT
terminal on this unit. (
>
28)
¾
Make sure that the television’s input setting (e.g., VIDEO 1) is
correct.
¾
When “24p Output” is set to “On”, HDMI authentication takes
place where 24p images switch to other images, and a black
screen is displayed. (
>
41)
¾
When “24p Output” is set to “On”, jittering may occur while
playing DVD-Video other than 24p images. In this case, turn
“24p Output” to “Off”. (
>
41)
¾
An incorrect resolution is selected in “HDMI Video Format”,
when the television is connected to HDMI AV OUT terminal.
Set the item again.
¾
Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
¾
The unit and television are using different video systems.
Change the setting to match the equipment you are
connecting with. (
>
41, “TV System” in the “TV Aspect /
HDMI Function Settings”)
¾
The system used on the disc doesn't match your television.
j
PAL discs cannot be correctly viewed on an NTSC
television.
j
This unit can convert NTSC signals to PAL60 for viewing
on a PAL television. (
>
39, “NTSC Contents Output”
in the “Picture”)
Video is not output in high definition.
¾
Confirm that the “HDMI Video Format” in the Setup menu is
set properly. (
>
41)
Audio is not output in bitstream.
¾
Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not
output in bitstream. To output the bitstream, select “Default
Settings” to restore the factory presets and make proper
settings.
The 4:3 aspect ratio picture expands left and right.
Screen size is wrong.
¾
Use the television to change the aspect. Refer to your
television’s operating instructions.
¾
When using an HDMI cable, change “TV Aspect” type to “4:3
Pan & Scan”. (
>
41)
No sound from other speakers.
¾
Check all connections and settings. (
>
28)
Cannot hear the desired audio type.
¾
Audio may not be heard when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Cannot switch audio.
¾
When connecting an amplifier/receiver using an HDMI cable,
you cannot switch the audio if “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby
D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.
(
>
40)
The capacity of the SD card decreased.
¾
When a BD-Video that supports BD-Live is used, and an SD
card is in the slot, data may be written to the SD card. (
>
18)
Music on an SD card cannot be played.
¾
Data that can be played from an SD card are AVCHD,
MPEG2 and JPEG data. (
>
7)
The contents of the card cannot be read.
¾
The card is not compatible or the contents on the card may
be damaged. (
>
7)
¾
Turn off and then turn on the unit again.
Still picture or motion picture does not display.
¾
Check that the SD card is inserted. (
>
13)
¾
It is not a format compatible with this unit. Or, the contents of
the SD card may be damaged. (
>
7)
¾
Playback of still pictures and motion pictures that were edited
with a PC etc. may not be possible.
The contents of the USB device cannot be read.
¾
This unit does not guarantee connection with all USB
devices.
¾
USB devices connected using a USB hub may not be
recognized by this unit.
¾
If inserted during playback the USB device may not be
recognized by this unit.
¾
On the USB device, are the settings for connecting with this
unit set correctly? Check the operating instructions of the
connected device.
I can’t connect to the network.
¾
Are you subscribed to high speed internet connection?
Check that the LAN cable is properly connected. (
>
31)
¾
Have you plugged a telephone cord into the LAN terminal on
this unit? Connect with a straight LAN cable. (
>
31)
¾
Confirm the power for the modem or broadband router is
turned on.
¾
Confirm the network settings. Follow any instructions you
may have received from your ISP (Internet Service Provider)
and make changes to the settings.
¾
Are the broadband router settings correct? Read the
operating instructions for the broadband router.
¾
Is the broadband router and/or modem connected correctly?
Check the operating instructions for each device and connect
accordingly.
¾
Check the “Network” and “BD-Live Internet Access” settings.
(
>
32, 39, 42)
Connection
Card
Photo Frame
USB device
Network
DMPB500EB-VQT2J83_eng.book 52 ページ ２０１０年３月３０日 火曜日 午後３時４２分
