Panasonic DMP-MST60, Operating Instructions Manual

Page: 25 / 34

- 25 -
Settings
∫
Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby
®
Digital and Dolby
®
Digital Plus only)
∫
Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +
¾ DTS
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥ Not making the proper settings may result in noise.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
∫ 3D Playback Message
Set to display or hide the 3D viewing warning
screen when playing back 3D images.
∫
Graphic Display Level ( > 23)
∫ Subtitle Text
Select a suitable item according to the language
used for MKV/Xvid subtitles text.
≥ This item is displayed only after playing back a file.
∫ On-Screen Language
Choose the language for menus and on-screen
messages.
∫
Easy Network Setting ( > 10)
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾ LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
¾ Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Press [OK] to show the following settings:
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
≥
If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
¾ IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
¾ Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
Sound
[MST60]
3D
Language
Network