29
CASE 2:
When replacing the BD Drive alone or the Digital P.C.B.
alone. (Not replacing as “BDP/Digital P.C.B. Module”.)
1. Remove the OPU FFC, and isolate it with an ESD pre-
vention bag (RPFC0114).
2. Remove the 18 pin FFC.
3. Remove the connector (A).
4. Remove the 4 screws (A) to remove BD Drive.
5. Remove the 3 screws (B) to remove Digital P.C.B..
Caution for assemble:
When remove the ESD prevention bag, do not touch the
OPU FFC conductive surface to avoid ESD damage.
10.1.8.
Power P.C.B.
1. Remove the connector (A).
2. Remove the 3 screws (A) to remove Power P.C.B..
Summary of Contents for DMP-BD45EB
