Panasonic DMP-BD45EB, Service Manual

Page: 43 / 75

43
[Finishing the Drive Adjustment]
21. When below message displayed, perform followings:
a. Confirm “P OFF” is displayed at the FL Display.
b. Disconnect the power cord from the unit.
c. Click the [OK] button.
22. Click the [Exit] button.
23. Click the [Exit] button.
24. Click the [Exit(E)] button.
The Drive Adjustment is finished.
11.2.5. When the latest data is updated to
TSN
The data file of the adjustment software may be update
because of a firmware update of the machine or other reason.
In such case, perform the following steps and use the latest
data.
1. Download the latest data to PC.
2. Click the “Spec Setup” button before the step 7.
3. Open the downloaded data and click the “New” button.
Then retrieve the data.
4. Select the latest data and click the “OK” button.
5. Go back the step 7 and click the “Exit” button.