Panasonic DMP-BD45EB, Service Manual

Page: 67 / 75

S7. Replacement Parts List
S-23
E.S.D. standards for Electrostatically Sensitive Devices, refer to “PREVENTION OF
ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES”
section.
1.* Be sure to make your orders of replacement parts according to this list.
2. IMPORTANT SAFETY NOTICE
Components identified with the mark have the special characteristics for safety.
When replacing any of these components, use only the same type.
3. Unless otherwise specified,
All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.
4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation
of this assembly in production, it will no longer be available.
5. Parts indicated with "JIG and ADJ." in the Remarks column are necessary to adjust the
BDP/Digital P.C.B. This adjustment software can be downloaded from "Support Information
from NWBG/VDBG-PAVC" web-site in "TSN system", together with instructions of "BD Drive
Adjustment" including preparations and connections etc.
Note: