background image

 

 

 

 

 

 

 

Instructions for use 

Thank you for purchasing the Musical Fidelity M2SCD player. 

 

The M2SCD consists of a top quality CD slot-loading mechanism with unsurpassed playability and a top quality over 
sampling 24 bit digital-to-analogue converter. This moves the digital artefacts to well outside the audio band, allowing 
easy removal without detriment to the top end of the audio band. Our well tuned filtering circuit gives immeasurably 
small  jitter,  noise  and  distortion  artefacts  allowing  astounding  imaging,  detail  and  transparency,  to  deliver  all  music 
types exactly as the artist originally intended. 

The M2SCD is designed to be partnered with present M2si and future M3 and M6 series products. This combination 
yields one of the best high-fidelity systems available at any price.  

Used properly and carefully, it should give many years of outstanding musical reproduction. 

Dust  regularly  with  a  soft  duster  or  soft  brush,  but  be  careful  when  using  cleaning  or  polishing  agents  -  they  may 
harm the surface finish. 

If there are any questions about the audio system, please consult the dealer who is there to help and advise. 

 

Summary of Contents for M2SCD



















Reviews: