- 75 -
Advanced (Recording pictures)
[REC] Mode:
Taking Pictures with the Self-Timer
Note
•
When using a tripod etc., setting the Self-Timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
•
When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the Self-Timer indicator will blink and then may turn on brightly
operating as an AF assist lamp
(P142)
to allow the camera to focus on the subject.
•
We recommend using a tripod when recording with the Self-Timer.
•
The number of pictures which can be taken in Burst Mode is fixed to 3.
•
The number of pictures which can be taken in [FLASH BURST]
(P97)
is fixed to 5.
•
Depending on the recording conditions, the recording interval may become more than
2 seconds when [10S/3PICTURES] is selected.
•
The flash output may not be constant when [10S/3PICTURES] is selected.
•
[10S/3PICTURES] cannot be set when any of Intelligent Auto Mode, Auto Bracket or
[PANORAMA ASSIST], [FLASH BURST] or [PHOTO FRAME] in Scene Mode is set.
•
You cannot use Burst Mode when [10S/3PICTURES] is selected.
•
Setting of the self-timer cannot be performed in following conditions.
–
In [HI-SPEED BURST] in Scene Mode
–
When recording motion pictures
Press
2
[
ë
].
Press
3
/
4
to select a mode.
•
You can also press
2
[
ë
] to select.
•
If you set [10S/3PICTURES], after 10 seconds the
camera takes 3 pictures at about 2 second intervals.
Press [MENU/SET].
•
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
•
The Self-Timer indicator
A
blinks and the shutter is
activated after 10 seconds (or 2 seconds).
•
If you press [MENU/SET] while the Self-Timer is set,
the Self-Timer setting is canceled.
•
When [10S/3PICTURES] is selected, the Self-Timer
indicator blinks again after the first and the second
pictures are taken and the shutter is activated
2 seconds after it blinks.
A
