Advanced (Recording pictures)
- 104 -
•
Refer to
P145
for the [MOTION PICTURE] Mode menu.
•
The flash setting is fixed to [
Œ
].
•
Refer to
P222
for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
•
When recording motion pictures with the lens cap string attached, the sound of the lens cap
string brushing against the unit may be recorded.
•
The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
•
When operating the zoom in recording motion pictures, it may take time to come into focus.
•
If the Extended Optical Zoom was used before pressing the motion picture button, those
settings will be cleared, so the focus range will change dramatically.
•
When the aspect ratio setting is different in still and motion pictures, the angle of view changes
at the start of motion picture recording. When [
REC AREA]
(P32)
is set to [ON], angle of
view during motion picture recording is displayed.
•
[STABILIZER] is fixed to [MODE1] in recording motion pictures.
•
In recording motion pictures, the following functions cannot be used.
–
Direction Detection function
–
Extended Optical Zoom
–
[FACE RECOG.]
•
It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
(P21)
•
If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being
recorded will not be recorded.
