- 103 -
Advanced (Recording pictures)
Note
•
The screen will change as following when the motion picture button is pressed in steps
2
and
3
.
¢
1 Set [REMAINING DISP.]
(P32)
to [
] to display the available recording time before
recording motion pictures.
¢
2 The screen that is displayed during Motion Picture Mode setting is different depending on the
setting of the
[REC MODE]
.
¢
3 [
!
] will not be displayed in the Creative Motion Picture Mode.
Start recording by pressing the motion
picture button.
A
Available recording time
B
Elapsed recording time
•
Release the motion picture button right after you press
it.
•
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
•
The recording state indicator (red)
C
will flash while recording motion pictures.
•
The screen will become dark momentarily, and recording will start after adjusting the
display.
•
Focus can be achieved during recording by pressing [FOCUS].
•
Focus can be set manually when [
MF
] is displaying.
(P73)
Stop the recording by pressing the motion picture button again.
•
Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL]
(P30)
.
•
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
A
Still picture recording
screen
¢
1
B
Motion Picture Mode
setting
¢
2
C
Motion picture recording
screen
D
Still Picture Mode
setting
¢
3
B
A
C
AUTO
AUTO
AUTO
7
7
R1m17s
R1m17s
R1m17s
3s
3s
3s
