44
VQT1Z82
Taking pictures with flash
(Continued)
Mode:
Available types in each mode
(
: default setting)
SCENE MODE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Set to
(AUTO),
(AUTO/RED-EYE reduction), or
(SLOW SYNC./RED-EYE
reduction) according to subject and brightness.
• The flash cannot be used when recording motion pictures, scene mode,
,
,
,
,
,
,
or
.
Focus range according to ISO sensitivity and zoom
Focus range
Max. W
Max. T
SENSITIVITY
(P.71)
AUTO
Approx. 0.6-5.3 m (1.97-17.4 feet) Approx. 1.0-3.6 m (3.28-11.8 feet)
ISO80
Approx. 0.6-1.5 m (1.97-4.92 feet)
Approx. 1.0m (3.28 feet)
ISO100
Approx. 0.6-1.6 m (1.97-5.25 feet) Approx. 1.0-1.1 m (3.28-3.61 feet)
ISO200
Approx. 0.6-2.3 m (1.97-7.55 feet) Approx. 1.0-1.6 m (3.28-5.25 feet)
ISO400
Approx. 0.6-3.3 m (1.97-10.8 feet) Approx. 1.0-2.2 m (3.28-7.22 feet)
ISO800
Approx. 0.8-4.7 m (2.62-15.4 feet) Approx. 1.0-3.2 m (3.28-10.5 feet)
ISO1600
Approx. 1.15-6.7 m (3.77-22.0 feet) Approx. 1.0-4.5 m (3.28-14.8 feet)
INTELLIGENT ISO
(P.70)
ISOMAX400
Approx. 0.6-3.3 m (1.97-10.8 feet) Approx. 1.0-2.2 m (3.28-7.22 feet)
ISOMAX800
Approx. 0.8-4.7 m (2.62-15.4 feet) Approx. 1.0-3.2 m (3.28-10.5 feet)
ISOMAX1600
Approx. 1.15-6.7 m (3.77-22.0 feet) Approx. 1.0-4.5 m (3.28-14.8 feet)
‘HIGH SENS.’ in
SCENE MODE
(P.56)
ISO1600-
ISO6400
Approx. 1.15-13.5 m (3.77-44.3 feet) Approx. 1.0-9.1 m (3.28-29.9 feet)
‘FLASH BURST’ in
SCENE MODE
(P.57)
ISO100-
ISO3200
Approx. 0.6-3.4 m (1.97-11.2 feet) Approx. 1.0-2.3 m (3.28-7.55 feet)
Do not touch or look at the flash (P.12) from close distances (i.e. a few cm).
Do not use the flash at close distances to other subjects (heat/light may damage
subject).
Flash settings may be changed when changing recording mode.
Scene mode flash settings are restored to default when scene mode is changed.
Edges of picture may become slightly dark if using flash at short distances without using
zoom (close to max. W). This may be remedied by using a little zoom.
If flash is to be emitted, flash type marks (e.g.
) will turn red when shutter button is
pressed halfway.
No pictures may be taken if these marks (e.g.
) are flashing (flash is charging).
Insufficient flash reach may be due to inadequately set exposure or white balance.
Flash effect may not be fully achieved with high shutter speeds.
Flash charging may take time if battery is low, or if using flash repeatedly.