VQT1Z45
96
Advanced (Playback)
∫
Operations performed during
slide show
The cursor displayed during playback is the same as
3
/
4
/
2
/
1
.
•
The menu screen is restored when [
‚
] is pressed.
∫
Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
•
[EFFECT] is set to [OFF] when playing slide show with motion pictures only.
•
[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures
are played back with the recommended effects in each category.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
•
[AUDIO] will be displayed only when the [EFFECT] is set to [OFF]. Audio will be played along
with the still picture with audio or audio of the motion picture by setting the [AUDIO] to [ON].
Note
•
It is not possible to add new music effects.
Press
3
to select [START] and then press
[MENU/SET].
Press
4
to finish the slide show.
•
Normal playback resumes after the slide show finishes.
A
Play/Pause
B
Stop
C
Back to previous picture
¢
D
Ahead to next picture
¢
¢
These operations can be performed only in the Pause Mode.
E
Reduce volume level
F
Increase volume level
Item
Settings
[DURATION]
1SEC./2SEC./3SEC./5SEC.
[REPEAT]
ON/OFF
[MUSIC]/[AUDIO]
ON/OFF
VQT1Z45~Body2_mst.fm 96 ページ ２００９年１月２９日 木曜日 午後５時４３分
