Panasonic DMC-SZ10EG-S Owner'S Manual Download

Page: 21 / 150

VQT3G90

Sequence of operations

Turn on the power

Set to

Set to the desired Recording Mode

Align the mode dial correctly to
the mode that you want to use.

→

[Intelligent Auto] Mode

Take pictures with automatic settings. (

→

26)

[Program AE] Mode

Record pictures with your own settings.
(

→

22)

[Aperture-Priority] Mode

Determine aperture, then record pictures.
(

→

58)

[Shutter-Priority] Mode

Determine shutter speed, then record
pictures. (

→

58)

[Manual Exposure] Mode

Determine aperture and shutter speed,
then record pictures. (

→

59)

[Custom] Mode

Record pictures using pre-registered
settings. (

→

60)

[3D Photo Mode]

Record 3D still pictures. (

→

69)

[Scene Mode]

Take pictures according to scene. (

→

61)

[My Scene Mode]

Take pictures in frequently-used Scene
Modes. (

→

62)

Aim the camera and shoot

■

Taking still pictures

Press the shutter button halfway to focus
Press and hold the shutter button to take the

picture

■

Recording motion pictures

Press the motion picture button to start

recording

Press the motion picture button again to

finish recording

Motion picture

button

Shutter button

Microphone

■

Holding the camera

Flash

AF Assist Lamp

• Stand with your arms close to your body and

with your legs apart.

• Do not touch the lens.

• Do not block the microphone when recording

motion pictures.

• Do not block the flash or the lamp. Do not look

at it from close range.

• Make sure that the camera does not move at

the moment the shutter button is pressed.

●

We recommend using the supplied hand strap to avoid dropping the camera.

Set to

Scrolling to the next picture: Drag your finger
across the screen from right to left.
Returning to the previous picture: Drag your
finger across the screen from left to right.

View pictures

(

→

32)

Turn off the power

Summary of Contents for DMC-SZ10EG-S























































































































































Search results

Summary of Contents for DMC-SZ10EG-S

Reviews:

Related manuals for DMC-SZ10EG-S

Brands by name

Popular brands

Panasonic DMC-SZ10EG-S, Owner'S Manual

Search results

Summary of Contents for DMC-SZ10EG-S

Reviews:

Related manuals for DMC-SZ10EG-S

Brands by name

Popular brands