Panasonic DMC-GX1 Lumix Basic Owner'S Manual Download

Page: 214 / 289

Playback/Editing

- 158 -

Playback/Editing

Playing Back Burst Pictures

∫

About the Burst Picture Group

The pictures taken continuously with burst speed set to [SH] are
recorded together as a burst group with the burst icon [

Burst icon

•

Deleting and editing in a group unit is possible. (For example, if you
delete a Burst Picture Group with [

], all the pictures in that group

are deleted.)

Note

•

Burst pictures recorded after the number of pictures has exceeded 50000 will not be grouped.

•

Burst pictures recorded on other cameras may not be recognized as a Burst Picture Group.

•

Burst pictures will not be grouped if recorded without setting the clock.

•

If you delete all pictures except one, that picture will be saved as a single picture instead of as
a Burst Picture Group.

Summary of Contents for DMC-GX1 Lumix


































































































































































































































































































Search results

Summary of Contents for DMC-GX1 Lumix

Reviews:

Related manuals for DMC-GX1 Lumix

Brands by name

Popular brands

Panasonic DMC-GX1 Lumix, Basic Owner'S Manual

Search results

Summary of Contents for DMC-GX1 Lumix

Reviews:

Related manuals for DMC-GX1 Lumix

Brands by name

Popular brands