119
VQT1Q36
Others
>
Set auto bracket (P53), [HI-SPEED BURST] (P59) in scene mode or [BURST] (P73) of the
[REC] mode menu to [OFF].
•
The focus range varies depending on the recording mode.
>
Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera. (P32)
•
There is camera shake (jitter) or the subject is moving slightly. (P33)
>
The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures. (P29)
>
When taking pictures at a slow shutter speed, use the self-timer. (P46)
•
Is the number of recordable pictures 2 or less?
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
>
Decrease the ISO sensitivity. (P68)
>
Increase the setting for [NOISE REDUCTION] in [PICT.ADJ.] or lower the setting for each of
the items other than [NOISE REDUCTION]. (P74)
>
Take pictures in bright places.
•
Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of
the recorded picture decreases slightly because of high sensitivity processing, but this is not a
malfunction.
•
If recording under fluorescent light, the brightness or the hue may change slightly when the shutter
speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction.
•
Are you using a MultiMediaCard? This unit does not support MultiMediaCards.
>
When you set the picture quality to [
÷
], [
ý
], [
ü
], or [
ÿ
], we recommend using a
high-speed card with “10MB/s” or greater displayed on the package.
•
Depending on the type of the card, recording may stop in the middle.
2 or 3 pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred.
The optical image stabilizer is not effective.
Taking pictures using auto bracket is not possible.
The recorded picture looks rough.
Noise appears on the picture.
The brightness or the hue of the recorded picture is different from the actual
scene.
A reddish vertical line (smear) appears on the LCD monitor during picture-taking.
•
This is a characteristic of CCDs, and it appears when the subject has a
bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
•
It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
DMC-FX500P_mst.book 119 ページ ２００８年２月２５日 月曜日 午後５時５４分
