Panasonic DMC-FT3 Operating Instructions Manual Download

Page: 16 / 186

- 16 -

Before Use

Attaching the Strap

Run the strap through the strap eyelet on

the camera.

•

If the strap cord is loose, it may snag when the side

door is opened or closed. Since damage or leaks may

result, be sure to attach the cord firmly, checking that it

is not snagged in the side door.

Insert your hand following the arrow, then

adjust the length.

Note

•

Attach the strap correctly following the procedure.

•

The camera will sink in the water, so use it underwater securely fastening the strap around your

wrist.

•

Do not swing around or pull forcefully on the unit with the strap attached. The strap may break.





Summary of Contents for DMC-FT3



























































































































































































Search results

Summary of Contents for DMC-FT3

Reviews:

Related manuals for DMC-FT3

Brands by name

Popular brands

Panasonic DMC-FT3, Operating Instructions Manual

Search results

Summary of Contents for DMC-FT3

Reviews:

Related manuals for DMC-FT3

Brands by name

Popular brands