Panasonic DMC-FT1EB, Service Manual

Page: 50 / 65

Table of contents
Service Manual
DSC0903016CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except EF/GT)
Colour
(A)...........Blue Type (only EB/EF/EG/EP/GC/GN/PC/PU)
(D)...........Orange Type (except EB)
(G)...........Green Type (except EB)
Model No.
DMC-FT1EB
DMC-FT1EE
DMC-FT1EF
DMC-FT1EG
DMC-FT1EP
DMC-FT1GC
DMC-FT1GJ
DMC-FT1GN
DMC-FT1SG
DMC-TS1GH
DMC-TS1GK
DMC-TS1GT
DMC-TS1P
DMC-TS1PC
DMC-TS1PU
Digital Camera
Name of Signal
OFTR FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Schematic Diagram ..................................................... S-5
S4.3. Top Operation Schematic Diagram ....................................... S-6
S4.4. Rear Operation Schematic Diagram ..................................... S-7
S5. Print Circuit Board .................................................................... S-8
S5.1. Flash P.C.B. .......................................................................... S-8
S5.2. Top Operation P.C.B. ............................................................. S-9
S5.3. Rear Operation P.C.B. ......................................................... S-10
S6. Replacement Parts List .......................................................... S-11
S7. Exploded View ....................................................................... S-15
S7.1. Frame and Casing Section.................................................. S-15
S7.2. Packing Parts and Accessories Section .............................. S-16
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice