Panasonic Digital Palmcorder PV-GS70, Operating Instructions Manual, Page: 12 / 226

12
Quick Guide
1
Charge the Battery.
(
l
18)
≥
Connect the AC Cable to the AC Adaptor and plug it into the
AC Wall Outlet.
≥
Attach the Battery to the AC Adaptor. (This will start the
charging process.)
≥
The [POWER] Lamp and [CHARGE] Lamp light up, and
charging starts. When the [CHARGE] Lamp goes off, charging
is completed.
≥
Since the Battery will not be charged when the DC Cable is
connected to the AC Adaptor, disconnect it.
2
Attach the Charged Battery to the Palmcorder.
(
l
18)
3
Insert the Cassette.
(
l
20)
≥
Slide the [OPEN/EJECT]
1
Lever toward the front and pull
down to open the Cassette Compartment.
≥
Insert the Cassette.
≥
Press the [PUSH] mark
2
to load the Cassette.
≥
Close the outside compartment Cover.
4
Start recording.
(
l
28)
≥
Turn the Palmcorder on. (
l
20)
≥
Rotate the Switch
3
to [ON]. (The [CAMERA] Lamp lights up.)
≥
Press the
4
Button. (Recording starts.)
≥
Press the
4
Button again to pause the recording.
To View the Playback Picture
5
Switch to the VCR Mode, rewind the tape, and play
the tape back.
(
l
43)
≥
Set the
5
Switch to VCR mode. (The [VCR] Lamp lights up.)
≥
Press the
6
Button. (Rewind the tape.)
≥
Press the
7
Button. (Playback starts.)
≥
Press the
8
Button. (Playback stops.)
6
Turn the Palmcorder off.
(
l
20
)
≥
Set the
9
Switch to [OFF].
OF
F ON MODE
1
2
3
4
5, 6
1
CAMERA
VCR
CARD PB
3
4
7
8
6
SEARCH
BACK
LIGHT
FADE
2
CAMERA
VCR
CARD PB
5
9
OPEN / EJECT
OF
F ON MODE
PUSH
PV-GS70P.book 12 ページ ２００３年７月２２日 火曜日 午後１時２８分