73
RQT9385
Referen
c
e
Why is the GUIDE Plus+ system only available
after approx. 2 hours?
¾
The data rate, at which GUIDE Plus+ is sent, is limited.
Depending on the country, signal quality and number of
channels received, the time until the GUIDE Plus+ system is
ready can vary.
How often is the GUIDE Plus+ data updated and
when?
¾
The GUIDE Plus+ data is transmitted from the Host Channel
(the television station transmitting the television programme list)
several times a day. Data will be transmitted at 2:50 AM every
day.
It takes approximately 2 hours to complete data download.
The GUIDE Plus+ data is downloaded automatically when the
unit is turned off. (
>
12)
Is it possible to programme a recording, with a
start and end time that are different from the
GUIDE Plus+ system?
¾
You can manually change the start and end time of
programmes in the Timer Recording menu. (
>
28)
Does the GUIDE Plus+ system support VPS/PDC?
¾
The GUIDE Plus+ system works independently of VPS/PDC.
However, you can programme TIMER recordings with VPS/
PDC in the Timer Recording menu. (
>
30)
How can I cancel a Timer programming?
¾
The “
F
” symbol appears in the GUIDE Plus+ when a Timer
Recording is programmed with the GUIDE Plus+ system. To
cancel a Timer Recording programming, press [PROG/
CHECK]. Select the desired entry and press [DELETE
¢
].
(
>
29)
Can I receive GUIDE Plus+ system data via a
connected satellite receiver or a Set Top Box?
¾
No, only via the built-in tuner. To perform timer recordings with
satellite receivers or Set Top Boxes, please use the External
Link feature or your unit’s manual timer programming. (
>
26,
28)
What happens when I unplug my unit from the
power outlet?
¾
The GUIDE Plus+ system data will not be updated. If the unit is
disconnected from the power supply for a longer period of time,
then the GUIDE Plus+ data is lost. Make sure that the time is
set again appropriately.
What happens if my postal code changes, e.g. if I
move?
¾
Change the postal code in the GUIDE Plus+ Setup menu. If
necessary, perform a full Auto-Setup. Saved GUIDE Plus+ data
may be lost. (
>
13)
What can or cannot be done using the USB port
on this unit?
¾
You can play DivX, WMA, MP3 or still picture (JPEG) files on a
USB memory. (
>
34)
¾
You can copy still pictures (JPEG) files on a USB memory to the
HDD, DVD-RAM or SD card (
[EH69]
). (
>
55)
¾
You can copy WMA or MP3 files on a USB memory to the HDD.
(
>
56)
¾
[EH69]
[EH59]
You can connect a video equipment and copy SD
Video to the HDD or DVD-RAM. (
>
53)
¾
Data on the HDD or a disc cannot be transferred to a USB
memory.
¾
Data on a USB memory cannot be edited or a USB memory
cannot be formatted on this unit.
¾
Some USB memories cannot be used with this unit. (
>
16)
What will happen if I try to record the same CD
multiple times?
¾
New album will be made following the existing album.
Can I transfer the music tracks from HDD to the
disc or USB memory?
¾
No, you cannot.
Please tell me about TV reception channels.
¾
Channel indications are different from the actual TV channels.
Refer to the following list of TV Reception Channels.
List of TV Reception Channels
§
Only for 8 MHz channel raster
GUIDE Plus+
USB
Music
TV Channels
Channel
indication
TV Channel
Italy
Other Countries
2 – 4
E2 – E10
E2 – E12
5 – 10
11 – 12
H1 – H2
13 – 20
A – H
—
21 – 69
E21 – E69
E21 – E69
74 – 78
S01 – S05
S1 – S5
80
S1
M1
81 – 89
S2 – S10
M2 – M10
90 – 99
S11 – S20
U1 – U10
121 – 141
S21 – S41
§
(Hyperband) S21 – S41 (Hyperband)
EH6959EC-RQT9385-L_eng.book 73 ページ ２００９年４月２７日 月曜日 午後３時５０分
