30
RQT9385
Advanced timer recording
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the “HDD”. If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥
The DIRECT NAVIGATOR shows which programmes were relief-
recorded (“
” is displayed.) (
>
33).
≥
If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
≥
Relief recording is not activated when recording the programme
with VPS/PDC and it is extended so that it no longer fits on the
disc.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1
Press [PROG/CHECK].
2
Press [
3
,
4
] to select the programme
and press [OK].
3
Press [
2
,
1
] to select “RENEW”
column.
4
Press [
3
,
4
] to select “ON” and press
[OK].
≥
If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥
Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥
When there is not enough space on the HDD, the programme may
not be recorded completely.
VPS (Video Programme System) or PDC (Programme Delivery Control) is a very convenient system which records exactly from beginning to end
of the TV programmes set in timer recording, even if the actual broadcasting time differs from the scheduled time due to delayed start or
extension of the programme duration. Also, if a programme is interrupted, for example, some special news is inserted, the recording will be
paused automatically and resumed when the programme continues.
≥
The beginnings of recordings may not be recorded correctly in some cases.
Relief Recording
Auto Renewal Recording
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD
Remain
TUE 18.08.09. 12:53:00
Mode
Stop
Start
Channel
Date
VPS
PDC
HDD
DVD
22:30
22:00
SUN OFF
HDD
1 ARD
Programme Name
SP
RENEW
ON
Note
VPS/PDC function
When VPS/PDC recording
≥
Use VPS/PDC time for recording the TV programmes.
≥
If a programme listed in a newspaper or magazine has two S
HOW
V
IEW
numbers, use the
S
HOW
V
IEW
number for VPS/PDC.
≥
VPS/PDC will activate when in this unit is set to standby mode. While this unit is on, recording
starts and finishes at times you set initially.
≥
Set “VPS/PDC” to “OFF” when recording time is not VPS/PDC time.
≥
VPS/PDC recording is not performed when VPS/PDC time is incorrect, even if only by one
minute. To find out VPS/PDC time, consult Teletext, a newspaper or magazine, or other source.
≥
If you made a timer recording using the GUIDE Plus+ system, the default setting for Switzerland
is “ON”.
To change “VPS/PDC” setting (
>
28, right column, step 3)
When the VPS/PDC signal drops out
because the broadcast signal is weak.
When a TV station does not transmit a
regular VPS/PDC signal.
Depending on the signals sent from the TV stations, the VPS/PDC system may not work properly
even when “VPS/PDC” has been set to “ON”.
Timer recording will be performed in the normal mode (without VPS/PDC) even if it was
programmed for VPS/PDC.
In this case, even if the timer recording is performed, the programmed timer recording will not be
cancelled at that particular time but at 4 a.m. two days later.
If the start times of scheduled
programmes listed in the newspaper or
magazine change at a later date.
Set “VPS/PDC” to “OFF” when programming a programme whose start time has been
subsequently changed.
Note
EH6959EC-RQT9385-L_eng.book 30 ページ ２００９年４月２７日 月曜日 午後３時５０分
