Panasonic DCGH5SGNK Operating Instructions For Advanced Features Download

Page: 51 / 385

2. Getting Started/Basic Operations

∫

Touch

To touch and release the touch screen.

∫

Drag

A movement without releasing the touch screen.

∫

Pinch (enlarge/reduce)

Pinch the touch screen apart (enlarge) or together
(reduce) with two fingers.

Touch screen (Touch operations)

• Touch the screen with the clean and dry finger.
• If you use a commercially available monitor protection sheet, please follow the instructions

that accompany the sheet.
(Some monitor protection sheets may impair visibility or operability.)

Not available in these cases:

• The touch screen may not function normally in the following cases.

– When touched by a gloved hand
– When the touch screen is wet

Fn11

Fn8

Fn7

Fn10

OFF

Fn9

2.0X

Summary of Contents for DCGH5SGNK


































































































































































































































































































































































































Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands

Panasonic DCGH5SGNK, Operating Instructions For Advanced Features

Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands