15
(EN)
Mounting
When mounting the bottom case
(step
2
)
Tighten the screws securely until they reach the bottom case.
(Otherwise, loose screw heads may hit the PCB and cause malfunction when
mounting the top case.)
Do not over-tighten the screws.
(The bottom case may be deformed, resulting in fall of the unit.)
Embed the included switch box into the wall beforehand.
1
Preparation to attach the
controller
3
Connect the connector, and attach
the control panel.
Remove the control panel.
Control panel
Claw
Pull out the connector while pushing the claw.
Connector
Remove the connector.
Connect the connector.
Push in until the claw clicks.
Claw
Connector
Attach it from above.
Do not allow the
wires to come in
contact with parts
on the PCB.
(Caught wires may
destroy the PCB.)
Push in until a
clicking sound
is heard.
2
Mount to the switch box.
Insert the controller to the switch
box (supplied) that has been
embedded in the wall.
Mount the bottom case. (with the
power supply part attached) of the
controller to the switch box (with
small screws (supplied))
• Do not allow the connection to be
exposed to the external force of wiring.
Switch Box
(supplied)
Bottom case (with
the power supply
part attached)
System
Controller
Wall
Switch Box
119
mm
0 - 5 mm
Cross-section view (Embedded state)
ENGLISH
業務用リモコン̲CZ-64ESMC3据付書̲En.indd 15
業務用リモコン̲CZ-64ESMC3据付書̲En.indd 15
2016/03/09 19:53:06
2016/03/09 19:53:06
