If the rack and/or the rod gets dirty...
Care
In case of malfunction
Situation
Possible causes
Solution
The rod does not
come out.
The rod cannot be
put away.
It makes a squeaky
sound.
Are you pulling the wrong end of
the pull cord?
Please pull the other end.
Please try to lift up the lid by hand once.
When you restart using this after a
long time, it may not be as easy to
open it as usual.
The arm joints are rubbing against
each other.
Please apply something like lubricating oil
(silicon type) on the arm joints (figure).
It may cause damage
to any resin parts.
Please do not use machine oil or anything similar.
(
(
Silicon type
How to install the rod
5RG
5RGVXSSRUW
$UPFRPSRQHQW
How to pull out the rod
Hold the arm component,
lift up the rod, and loosen it.
About the rod
Hold the arm component and place the rod on the rod support.
● Wipe clean with a damp cloth and a solution of mild detergent, then remove
all moisture with a dry cloth.
* Do not clean with benzine or thinners, etc.
(It may cause deformation or fading.)
4
● If it comes into contact with chemicals, please remove them immediately.
Depending on the type of chemical and the length of exposure, color fading
may occur.
Ensure rod is fully contracted before storing it away.
PRINTED IN JAPAN
I0116-0
