155
Setting connection network
1
Check that the Wireless LAN LED is ON. Point the remote control to the air conditioner
and press the Wireless LAN button until the Wireless LAN LED starts blinking.
3
Select the preferred connection setup
mode.
Connection Guide
Step 1
Step 2
Step 3
Connect with WPS mode
Connect with AP mode
The router supports WPS.
The router does not supports WPS.
Cancel
2
Select the status of the Wireless LAN
LED.
Wireless LAN LED.
Connection Guide
Step 1
Step 2
Step 3
LED is OFF
LED is ON
LED is Blinking
Cancel
Connection Guide
Cancel
Next
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
SET
CANCEL
Note
• If the Wireless LAN LED blinks continuously and
you do not want to use the app, press the Wireless
LAN button to turn it off.
Fast blink
The unit is establishing the connection.
Slow blink
The unit is not securing the connection.
No blink
(stays on)
The unit has established the connection.
• It can establish the connection to the unit even if the
unit is turned OFF.
