Note:
1.
2.
When the ON/OFF button on the remote control is pressed, the cursor key which points to “OFF
”
will appear or
disappear to indicate the ON/OFF status of the air conditioner.
The air conditioner is running but the cursor key which points to “OFF
”
appears. The air conditioner can be
stopped with any button (Except for “ON/OFF
”
, “TIMER SET
”
, “TIMER ON
”
) pressed.
The air conditioner is on standby, but the cursor key which points to “OFF
”
disappears. The air conditioner can
be started with any button(Except for “ON/OFF
”
, “TIMER SET
”
, “TIMER OFF
”
) pressed.
For some reason (Ex. The signal of the remote control does not reach the signal receiver of the indoor unit.), the
display of the remote control will not correspond with the actual ON/OFF status of the indoor unit:
26
PRESS "OFF/ON" BUTTON
O
2
hr DELAY
ON
STD
FAN SPEED
AUTO
AIR SWING
AUTO
AUTO
COOL
DRY
HEAT
OFF
8.8
About Cursor Key Which Points To “OFF” On Remote Control
When the ON-TIMER is set, operation will start before the actual set time. This is to enable the room
temperature to reach the set temperature at the set time.
COOL- 15 minutes in advance.
HEAT, AUTO - 30 minutes in advance
CS-XA9DKD / CU-XA9DKD / CS-XA12DKD / CU-XA12DKD
O
2
hr DELAY
OFF
STD
FAN SPEED
AIR SWING
AUTO
OFF
COOL
DRY
HEAT
8.9
Random Auto restart control
If there is a power failure during air conditioner operation, operation will be automatically restarted after 3 to
4 minutes when the power is resumed.
It will start with previous operation mode and airflow direction.
Auto Restart Control is not available when Timer is set.
