JET
STREAM
FAN SPEED
MODE
TEMP
AIR SWING
SLEEP
DISPLAY
CLEAN
ON
OFF
CANCEL
nanoe-G
LOCK
RESET
RC
AC
CHECK
SET
SMART
How to use
Auto OFF/ON button
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• Press the button again to turn off.
Press to restore the
remote control to
default setting.
Press this button to
switch OFF/ON
hidden display.
Not used in normal
operations.
Press for 5 seconds to
lock remote
Remote control
display
Remote control
receiver and indicator
nanoe-G
Wi-Fi
TIMER
10
To maximise comfort while
sleeping
• This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after every 3 hours operation.
• The unit is turned off after 8 hours.
• Can be cancelled by pressing the respective
button again.
SLEEP
To select operation mode
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
Unit run with optimised settings.
You can change the temperature according to
your comfort.
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in “Fan Only” mode
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
Only indoor unit fan operates as per remote settings.
Outdoor is OFF, so no cooling achieved.
Provides fresh air circulation in the room.
To OFF/ON hidden temperature
display
• When the display is turn OFF by remote controller,
It will turn ON automatically for few seconds upon
receiving any command from remote or in case of
mains power reset.
DISPLAY
To clean dust on evap. coil of
the Air-Conditioner Unit
CLEAN
•
‘CL’ will be displayed on unit and remote controller.
While ‘CL’ is diplayed, all other functions of the
remote controller will be disabled, except for
ON/OFF button. Applicable for 10 to 15 minutes.
• This feature can only be used in OFF condition.
To turn ON/OFF Wi-Fi function
of Air-Conditioner Unit.
Wi-Fi
SMART
Use button for one time to switch ON Wi-Fi.
Press button for “5” seconds to enter in
setup mode.
Press followed by CANCEL button to turn
OFF Wi-Fi for “4” hours.
Press CANCEL button for “10” seconds to check
Wi-Fi connection.
SMART
SMART
SMART
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2705̲OL.ai 10 3/3/2020 9:56:29 AM
ACXF55-2705̲OL.ai 10 3/3/2020 9:56:29 AM
