AUTO
HEAT
COOL
DRY
FAN
SPEED
AIR
SWING
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
• Recommended temperature:
20°C ~ 24°C
HOw TO OPERATE
Notes:
• Use a screwdriver to short the two Reset Terminals on the
back of remote control to restore the remote control's default
setting.
• Remove the batteries if the unit is not to be used for a long
period.
REMOTE CONTROL TRANSMITTER
AUTO MODE - FOR yOUR CONvENIENCE
HEAT MODE - TO ENjOy wARM AIR
• Make sure it is not
obstructed.
• Certain fluorescent lights
may interfere with signal
transmission. Please
consult your nearest
dealer.
Maximum distances : 8m
INDICATOR
INDICATOR
RECEIvER
RECEIvER
Close
Insert AAA or
R03 batteries
Pull out
Inserting the batteries
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press
for
“
” or
for “
”.
Room
temperature
Operation
mode
Standard
setting
temperature
(+2°C)
(–2°C)
23°C & above
Cool
25°C
27°C
23°C
Below 23°C
Dry
22°C
24°C
20°C
Below 20°C
Heat
21°C
23°C
19°C
• Recommended temperature:
26°C ~ 28°C
COOL MODE - TO ENjOy COOL AIR
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
• Recommended temperature:
1°C ~ 2°C
lower than room
temperature.
● For heat, cool and dry modes, the range of
temperature can be selected from 16°C ~ 30°C.
DRy MODE - TO DEHUMIDIFy THE
ENvIRONMENT
Select
turn on
Adjust
temperature
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
MODE OPERATION
MODE OPERATION
AUTO HEAT
DRY
COOL
• The retention period of batteries might be affected
to be shorter because of the using times of the
remote control, even less than one year.
lCD display
Summary of Contents for CS-PA7GKD
Page 39: ...39 g k k ...
