11
Connection network using AP mode (method 2)
* (For Android 5.0 and above & iOS 11 and above only)
1
Select Advance setting (AP) from remote controller.
12:00,Mon
Function setup
Select
Confirm
Powerful
Quiet
Filter check
WLAN
12:00,Mon
WLAN
Select
Confirm
WLAN ON/OFF
Easy setting (WPS)
Advance setting (AP)
Device registration
12:00,Mon
WLAN ON/OFF
Confirm
Request
(Remote Controller Display)
Join to connect to the “Panasonic-CS-wirelessAP” network.
2
Enter the password of the selected wireless router and continue.
3
When connection of air conditioner to router is successful, the Wireless LAN
LED will changed from blinking to ON. If the Wireless LAN LED is ON, connect
the smartphone to wireless router. (return to this application after completing the
wireless network settings to continue the setup)
• If the Wireless LAN LED keep blinking, check the wireless router connection.
*1 The interfaces shown here refers to models with wireless remote controller,
however models with wired remote controller shares the same interfaces and
illustrations. Please refer wired remote controller display selection to perform the
app settings.
*1
