Panasonic CS-E9HKEA, Operating Instructions Manual

Page: 4 / 56

4
FAN
SPEE
D
AIR
SWING
AUT
O
HEA
T
COOL
DRY
ION
OFF/ON
TEM
P
MOD
E
QUIET
AIR SWING
TIMER
ON
SET
OFF
CANCE
L
AC
RC
RES
ET
SET
CHECK
CLOCK
INVER
TER
1
3
2
POW
ERFUL
FAN SPEED
ion
PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Front panel
Receiver
Auto OFF/ON button
• Used when remote control is misplaced or
malfunction.
Step Action Mode
1 Press once. Automatic
2
Press and hold until you
hear one beep, then release.
Force
cooling
3
Repeat step 2. Press and
hold until you hear two
beeps, then release.
Normal
cooling
4
Repeat step 3. Press and
hold until you hear three
beeps, then release.
Force
heating
Press the button to turn off.
Air fl ow direction louver
• Do not adjust by hand.
Maximum distances: 10m
Remote control
display
OFF/ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control display
to prevent the unit from starting/stopping improperly.
TEMP
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature could
induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During operation
mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks during this
operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
Air fi lter
INDICATOR
Supersonic
air purifying
device
Ionizer
Do not touch
during operation.
(Green) (Orange) (Orange) (Green) (Green) (Blue)