background image

5

• 

ECONOMY

 and 

QUIET/ POWERFUL

can be activated in 

all modes and can be cancelled by pressing the 

respective

 

button again.

• 

MILD DRY

 only can be activated in COOL mode and can 

be cancelled by pressing the button again.

• 

MILD DRY

ECONOMY

 and 

QUIET/ POWERFUL

cannot be activated at 

the same time.

• 

 can be activated even when the unit is turned 

off. In this condition, once e-ion operation is ON, the 

unit will operate with AUTO fan speed and air swing.

TO SELECT FAN SPEED 

(5 OPTIONS)

•  For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

AIR SWING

TO ADJUST AIRFLOW DIRECTION  

(5 OPTIONS)

    

 

    

•  Keeps the room ventilated.

•  In COOL/DRY mode, if AUTO is set, the louver swing 

left/right and up/down automatically.

•  In HEAT mode, if AUTO is set, the horizontal louver 

fi

 x 

at predetermined position. The vertical louver swing 

left/right after the temperature rises.

TO MONITOR AIR 

QUALITY

•  Patrol sensor detects air quality.

•  When air quality is unsatisfactory, e-ion operation will 

start automatically.

ECONOMY

TO SAVE ELECTRICAL 

POWER CONSUMPTION

•  Save power consumption at unoccupied room by 

adjust set temperature up to 3°C automatically.

•  Brightness of all indicators will be dimmed.

QUIET/ POWERFUL

POWERFUL

NORMAL

QUIET

TO ENJOY QUIET ENVIRONMENT

•  This operation reduces indoor and 

outdoor units noise.

TO ACHIEVE TEMPERATURE QUICKLY

•  This operation will stop automatically 

after 20 minutes.

MILD DRY

TO IMPROVE HUMIDITY 

AND MOISTURE LEVEL

•  This operation reduces air dryness and provides you 

with a comfortable living environment.

•  When vertical air

fl

ow direction is set to AUTO, it 

stops at lower position to avoid cold air contact. 

However, you can adjust the louver direction 

manually.

  OPTIONAL SETTINGS

 OPTIONAL 

SETTINGS

Patrol starts automatically with the unit 
switched on with 

.

Press and hold for 5 seconds, then release 
to disable or restore this setting.

Press and hold for 5 seconds to dim or 
restore the unit’s indicator brightness.

Press and hold for approximately 10 
seconds to show temperature setting in 
°C or °F.

 

Press to restore the remote control’s default 

setting.

 , 

  Not used in normal operations.

Use curtains to screen off sunlight and outdoor heat to 
reduce power consumption during cool mode.

POWERFUL

QUIET

MILD DRY COOLING

ECONOMY

  TO SET THE TIMER

  TO SET THE TIMER

•  2 sets of ON and OFF timers are available to turn ON or 

OFF the unit at different preset time.

Select ON or OFF Timer

Set the 

time.

Con

fi

 rm.

   

TIMER

•  Example of application at living room:
   Morning: ON 

¥

1 at 07:00 (Wake up)

                  OFF 

¥

1 at 08:00 (Out for work)

   Evening: ON 

¥

2 at 17:00 (Back home)

                  OFF 

¥

2 at 22:00 (Sleep)

•  To cancel ON or OFF timer, press 

 or 

 to 

select respective 

¥

1 or 

¥

2 then press 

.

•  If timer is cancelled manually or due to power failure, 

you can restore the timer again by pressing 

 or 

 to select respective 

¥

1 or 

¥

2 then press 

.

•  Upcoming timer will be displayed and will be activated 

in sequence.

•  When ON Timer is set, the unit may start earlier (up 

to 35 minutes) before the actual set time in order to 

achieve the desired temperature on time.

•  Timer operation is based on the clock set in the remote 

control and repeats daily once set. For clock setting, 

please refer to Remote Control Preparation at back 

cover. 

Cancel

¥

2

¥

1

Cancel

¥

2

¥

1

Cancel

¥

2

¥

1

Cancel

¥

2

¥

1

F566901-OYTK0906-01.indd   5

F566901-OYTK0906-01.indd   5

6/2/2009   3:23:26 PM

6/2/2009   3:23:26 PM

Summary of Contents for CS-E18JKR









Reviews: