Panasonic CS-E12NKR, Service Manual

Page: 84 / 205

84
š
Manual horizontal airflow direction can be set using remote control; the angles of the vane are as stated below
and the positions of the vane are as Figure 2 above.
Pattern 1 2 3 4 5
Airflow Direction
Patterns at Remote
Control
Vane Angle (°) 90 68 78 102 112
13.5 Quiet operation (Cooling Mode/Cooling area of Dry Mode)
š
Purpose
o
To provide quiet cooling operation compare to normal operation.
š
Control condition
o
Quiet operation start condition
ƒ
When “POWERFUL/QUIET” button at remote control is pressed twice.
POWERFUL/QUIET LED illuminates (low intensity).
o
Quiet operation stop condition
ƒ
When one of the following conditions is satisfied, quiet operation stops:
š
POWERFUL/QUIET button is pressed again.
š
Stop by OFF/ON switch.
š
Timer “off” activates.
š
AUTO COMFORT button is pressed.
š
ECONAVI button is pressed.
š
Mild Dry Cooling button is pressed.
ƒ
When quiet operation is stopped, operation is shifted to normal operation with previous setting.
ƒ
When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.
ƒ
When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
ƒ
During quiet operation, if timer “on” activates, quiet operation maintains.
ƒ
After off, when on back, quiet operation is not memorised.
š
Control contents
o
Fan speed is changed from normal setting to quiet setting of respective fan speed.
This is to reduce sound of Hi, Me, Lo for 3dB (some models more than 3dB).
o
Fan speed for quiet operation is reduced from setting fan speed.
13.6 Quiet operation (Heating)
š
Purpose
o
To provide quiet heating operation compare to normal operation.
š
Control condition
o
Quiet operation start condition
ƒ
When “POWERFUL/QUIET” button at remote control is pressed.
POWERFUL/QUIET LED illuminates. (low intensity)
o
Quiet operation stop condition
ƒ
When one of the following conditions is satisfied, quiet operation stops:
š
POWERFUL/QUIET button is pressed again.
š
Stop by OFF/ON switch.
š
Timer “off” activates.
š
AUTO COMFORT button is pressed.
š
ECONAVI button is pressed.
š
Mild Dry Cooling button is pressed.
ƒ
When quiet operation is stopped, operation is shifted to normal operation with previous setting.
ƒ
When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.
ƒ
When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, except
fan mode only.
ƒ
During quiet operation, if timer “on” activates, quiet operation maintains.
ƒ
After off, when on back, quiet operation is not memorised.