ENGLISH
15
6
TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
7
TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIET
POWERFUL
NORMAL
POWERFUL
TO REACH TEMPERATURE
QUICKLY
POWERFUL
• This operation will stop automatically after 15
minutes.
QUIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces air
fl
ow noises.
8
9
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
& COMFORT
ECONAVI
To optimize energy
saving
ECONAVI
AUTO
COMFORT
To maximize comfort
AUTO COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and air
fl
ow to keep you comfort
consistently.
Heat Source & Movement
Normal
High
Low
None
Set Fan Speed
≤
Medium
Fan
+1 tap*
+2°C
-1°C
+1°C
+1 tap
COOL/DRY Mode
Set Temperature
Set Fan Speed
-2°C
-2°C
HEAT Mode
Set Temperature
+0.3°C
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal air
fl
ow
direction louver either
fi
x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING
is selected, the ECONAVI
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is in
fl
uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human
being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
Sunny
Cloudy/
Night
Sunny
Cloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
-1°C
-1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
