Panasonic CRS1, Service Manual

Page: 35 / 102

The error code is automatically display after entering into self-diagnostic mode.
Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
IHMS Cam gear
abnormality Cam gear does not
rotate to “HOME”
position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ICSL Cam gear/gear units
abnormal Cam gear does not
rotate to “PLAY” driving
position and hence does
not drive playing tray to
“STOCK” position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ISTK Drive rack/gear
assembly abnormal The tray drive rack does
not move to “STOCK”
position. (Tray does not
move
to “STOCK”
position)
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
IPLY Drive rack/gear
assembly abnormal The tray drive rack does
not move to “PLAY”
position. (Tray does not
move to “PLAY” position) For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ITOP UD assembly UD Rack does not move
to front direction. This
lead to UD base not
raise to top position. For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
IUDS UD assembly After TOP SW is
detected, UD rack does
not move into tray 1
position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
HOME Cam gear/gear
assembly abnormal Cam gear does not
move to “HOME”
position under following
conditions
1.
After tray is load to
“PLAY” position.
2. After tray is unload
to “STOCK” position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
35
CRS1