Panasonic CQ-VD6503N, Operating Instructions Manual

Page: 65 / 100

8
9
CQ-VD6503N
English
Electrical Connections
Precautions (ISO Connector)
¡ The pin arrangement of the power connector conforms
to ISO standard.
¡ The pin arrangement of ISO connectors in some cars
may differ from the ISO standard.
¡ Please check that the pin arrangement of the connec-
tor in your car conforms to ISO standard.
¡
For car types A and B, change the wiring of the red
and yellow leads as shown at below.
¡ After connection, insulate the portions marked (
C
)
with insulating tape.
Note:
¡ For cars other than types A and B, please consult your
local car shop.
C
C
BATTERY 15A
ACC
C
C
BATTERY 15A
ACC
C
C
ISO
A
B
Standard ISO
Car Type A
Car Type B
BATTERY 15A
ACC
A7: IGN or ACC 12 V supply
(Red)
(Yellow) (Yellow)
(Red)
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Red)
(Yellow)
A4: IGN or ACC 12 V supply
A4: 12 V Batteries (Continuous supply)
A7: 12 V Batteries (Continuous supply)
A7: 12 V Batteries (Continuous supply)
A4: No connection
A7
A4
Note:
¡
To prevent from damage to the unit, be sure to follow
the wiring diagrams at right.
¡
Be sure to fully plug in the connectors. Secure them
with clamps and tapes.
¡ All other installation methods require the use of dedi-
cated metal fittings. Consult with a qualified servicing
engineer or your dealer if other methods are required.
Caution
¡ Check the connectors provided on your car (see precaution below) before connecting the system.
¡
This unit is designed for use in a car having a 12 V negative ground battery system.
¡
To prevent damage to the unit, be sure to follow the connection diagram.
¡
Strip about 5 mm of the lead ends for connection (only non-ISO connector cords).
¡
Do not insert the power connector into the unit until the wiring is completed.
¡ Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and pre-
vent cable terminals from touching any metal parts.
¡ Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery
may clear the memory.
¡ Run the cords avoiding the spots where the temperature can be extremely high.