90
Writing to CDs (B's Recorder/B's CLiP)
NOTE
z
Bootable disk images (1) and (2) are specially designed for this computer. (Contains
KMEUSB.SYS)
At the time of purchase, images (1) and (2) are selected.
z
If you boot the system using a disk created using bootable disk image (3) or (4), one
of the following error messages will be displayed, but this is not a malfunction.
<When booting the system on this computer>
• Not found CDROM !!
Check CD-ROM power and IDE cable.
CD-ROM drive is not available.
<When booting the system on a computer is connected an ATAPI (IDE) drive>
CD-ROM Drive is not ready, aborting installation.
z
This computer cannot be booted using a disk created using boot disk image (5) or (6).
z
If you want to share a bootable disk with a CF-W2 series or CF-Y2 series, select boot-
able disk image (3) or (4).
z
Images (2), (4), and (6) are used with the B's Recorder “HDD Backup” function.
The
icon is displayed on the notification area
z
The DVD-ROM & CD-R/RW drive power is off.
Disk cover opens automatically
z
When B's Recorder is finished writing, the disk cover opens automatically. You can
change the settings for B's Recorder so that the disk cover does not open automatically. If
you click [OK] after writing, however, the disk cover will open regardless of the settings.
Do not know recommended disk
z
Refer to “Writing or Rewriting Data to Disks” for information about recommended disks
(
Notes During Use