155
Problems with Starting Up, Shutting Down, and Standby and
Hibernation Mode
z
If "Extended RAM Module Failed" appears, the RAM module is not correctly inserted.
Turn off the computer, check that the RAM module is a recommended module, then insert
it correctly.
z
If "Standard RAM Failed" appears, contact your technical support office.
z
The drive letter
for the SD memory card cannot be changed or fixed.
z
The drive letter for the SD memory card is allocated as the first drive letter available when
the memory card is first recognized.
z
In some cases, the drive letters for the internal DVD-ROM & CD-R/RW drive or connected
devices (SD memory cards, external drives, etc.) may change when the internal DVD-
ROM & CD-R/RW drive power is turned on or off. To prevent these letters from changing,
we recommend that you allocate the drive letter for the internal DVD-ROM & CD-R/RW
drive from the latter half of the alphabet (e.g., "L drive"). (
*1
The drive letter is a single character from A to Z allocated to memory devices (drives) by Windows.
z
Did you remove the SD memory card while it was writing?
Wait until the Check Disk function is completed; do not interrupt this function. To remove
the card, refer to “SD Memory Card”. (
There is a beep sound, and either "Extended RAM Module
Failed" or "Standard RAM Failed" appears
The drive letter for the internal DVD-ROM & CD-R/RW drive or
the SD memory card is different from the last time the computer
was started up.
If Windows is started up while the SD memory card is inserted,
Check Disk (CHKDSK) will be executed.