5. Remove Screw (U), and disconnect the Pad/HDD FPC from
the Top Cabinet Ass’y.
Screw (U): DXHM0056ZA
6.2.12. Removing the Antenna Board (L),
(R)
Preparation: Make sure that the steps in sections 6.2.1 to
6.2.4 and section 6.2.10 have been taken first.
1. Remove the Screw (V) of the Antenna Board (L).
Screw (V): DXHM0056ZA
2. Draw out the Antenna Cable (L) from the groove in the Top
Cabinet Ass’y, and remove the Antenna Board (L).
3. Remove the two Screws (W) of the Antenna Board (R).
Screw (W): DXHM0056ZA
4. Draw out the Antenna Cable (R) from the groove in the Top
Cabinet Ass’y, and remove the Antenna Board (R).
6.2.13. Removing the Speaker (L), (R)
Preparation: Make sure that the steps in sections 6.2.1 to
6.2.4 and section 6.2.10 have been taken first.
1. Peel off the Double-sided Tape from the Top Cabinet Ass’y,
and remove Speaker (L) and (R).
6.2.14. Removing the LCD Front Cabinet
Ass’y/Hinge (L), (R)
Preparation: Make sure that the steps in sections 6.2.1 to
6.2.4 have been taken first.
1. Remove the Screw (Y) from the Hinge Cover (L) and the
Screw (Y) from Hinge Cover (R), and remove the Hinge
Cover (L) and (R) from the LCD Block.
Screw (Y): D4FNL
29
Summary of Contents for CF-Y2 Series
