3. Operate the Open Button of the LCD Unit, and open the
LCD Block to an angle of 90 degrees or more.
4. Remove the Screws (E) and the six Hooks, and then
remove the Side Cover (R).
Screw (E): DXQT2+G6FZL
5. Remove the six Hooks, and remove the Side Cover (L).
6. Remove the Disk Cover Shaft from the Disk Cover.
7. Remove the nine Screws (F) of the Top Cabinet Ass’y.
Screw (F): DXQT2+G6FZL
8. Set the Main Unit upright with its Combo Drive side facing
down.
9. Remove the two Hexagonal-head Screws (G) of the VGA
connector.
Hexagonal-head Screw (G): DFHE5035ZB
10. Remove the two Screws (H) and two Screws (J) of the LCD
Block, and then remove the Bottom Cabinet Ass’y.
Screw (H): XTB26+10GFN
Screw (J): DXYN3+J5FNL
25
Summary of Contents for CF-Y2 Series
