Panasonic CF-M34 Series Reference Manual Download | Manualshive

Page: 1 / 69

background image

Reference Manual

Personal Computer

®

Contents

Key Combinations .............................................. 2
LED Indicators .................................................... 3
Touch Pad (Advanced) ....................................... 4
Touchscreen ....................................................... 8
Panasonic Hand Writing

Windows 98

................ 11

Display Rotation Tool

Windows 98

Windows 2000

.... 13

Standby/Hibernation Functions ...................... 15
Security Measures ............................................20
Computing on the Road ...................................24
Battery Power ...................................................29
PC Cards ........................................................... 35
External Display ...............................................37
USB Devices ..................................................... 41
Modem ............................................................... 42
LAN ....................................................................44
Port Replicator ..................................................47
Accessories ......................................................48
Hard Disk Drive................................................. 49
Setup Utility ......................................................51
Technical Information ......................................57
DMI Viewer ........................................................ 59
List of Error Codes ........................................... 60
Dealing with Problems (Advanced) .................62

Illustrations in this Reference Manual

In this manual, descriptions are given us-
ing illustrations not featuring the hand
strap for convenience of explanation.

NOTE:

NOTE provides a useful fact or helpful information.

CAUTION:

CAUTION indicates a condition that may result in minor or moderate injury.

WARNING:

WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Shut Down]:

This illustration means to click [Start], then to click [Shut Down].

(For some applications, you may need to double-click.)

Enter :

This illustration means to press the [Enter] key.

Fn + F5 :

This illustration means to press and hold the [Fn] key, then press the [F5] key.

Windows 98

:

Information for Microsoft

®

Windows

®

98 Second Edition users.

Windows 2000

:

Information for Microsoft

®

Windows 2000 Professional users.

Windows NT

:

Information for Microsoft

®

Windows

®

NT

®

Workstation Version 4.0 users.

page:

When the cursor is moved to an item under [Contents] or to

page (green display), the

shape of the cursor will change to

. Under this condition, if characters are tapped (or a

click is made), the corresponding page in the Reference Manual will be displayed.

:

This illustration means to refer to the Operating Instructions.

Model No.

CF-M34

Series

2000

NT

98

We recommend that this Reference Manual be printed.

1
2
3
...
»

Summary of Contents for CF-M34 Series






































































Reviews:

No comments

Related manuals for CF-M34 Series

Brand: IBM Pages: 48

Brand: IBM Pages: 78

Brand: IBM Pages: 76

Brand: IBM Pages: 72

Brand: IBM Pages: 66

Brand: IBM Pages: 70

Brand: IBM Pages: 56

Brand: IBM Pages: 72

Brand: IBM Pages: 78

Brand: IBM Pages: 52

Brand: IBM Pages: 118

Brand: IBM Pages: 114

Brand: IBM Pages: 46

Brand: IBM Pages: 116

Brand: IBM Pages: 118

Brand: IBM Pages: 90

Brand: IBM Pages: 86

Brand: IBM Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands