![background image](http://html.mh-extra.com/html/panasonic/cf-m34-series/cf-m34-series_reference-manual_264383008.webp)
8
Your computer is equipped with a touchscreen function allowing you to perform the
same operations as the touch pad or mouse by touching the surface of the display with
your finger or stylus (included). (The following explanation gives one example (for the
default settings). The operation settings can be changed in [Start] - [Programs] - [Updd]
- [Settings].)
Handling the Touchscreen
Do not place any object on the surface or press down forcefully with sharp-pointed
objects (e.g., nails), or hard objects that can leave marks (e.g., pencils and ball
point pens).
Do not apply pressure within 5
mm
of the perimeter of the display panel. The
cursor may move to the edge of the display.
Do not operate the computer when such things as dust are on the screen. Do not
allow substances, such as oil to contact the LCD. The cursor may not work prop-
erly in such cases.
When the touchscreen becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth (included).
Do not use benzene or thinner, or disinfectant-type alcohol.
(For more information, refer to “Suggestions About Cleaning the LCD Surface” that
comes with the soft cloth.)
Moving the cursor
Clicking
Double-clicking
Dragging
Cursor
Touchscreen
CAUTION
The touchscreen function can not be used in the MS-DOS mode and when
using the full screen in [MS-DOS prompt].
When the operation of panning (only LCD) is performed while the screen reso-
lution is set to [1024 x 768 dots] or more, the touchscreen function will not work
properly.
If a change is made to the screen resolution, or the cursor can not be pointed
correctly with your finger, be sure to perform [Calibrate].
page 9
Touch and hold the object (i. e.
file or icon), move your finger on
the surface (dragging the object
to the desired location), then re-
lease your finger.
Two quick
taps
One tap
Handling the Stylus
Clean the stylus tip and screen prior to operation. Foreign particles can scratch
the screen and impede the operation of the stylus.
Use the accessory stylus only on the wireless display screen. Using it for any other
purpose may damage the stylus and scratch the screen.
Do not use pencils, implements with sharp tips or hard objects for screen opera-
tions. The screen may be damaged as a result.