manualshive.com logo in svg

Panasonic CF-74ECBGDBM, Service Manual

The Panasonic CF-74ECBGDBM is a high-performance rugged laptop designed to withstand extreme conditions. To maximize its potential, a comprehensive Service Manual is available for download, completely free of charge, on our website. Explore the manual to unlock the full capabilities of this durable device at manualshive.com.

Share
Download
background image

9-15

9.2.8.

Setting the DC-IN PCB and I/O PCB

1. Fit the Modem Cable and LAN Cable between the MOD-

ELAN Holders, and set them on to the computer.

2. Fix the I/O PCB to the I/O Plate using the four

Screws<N19>.

3. Fix the I/O PCB with I/O Plate to the computer using the

two Screws<N9>.

4. Fix the DC-IN PCB to the computer using the two

Screws<N9>.

Screws <N9>: DFHE5025XA
Screws <N19>: DFHE5035ZB

Q

 Arranging the DC-IN Cable

<N9>

<N9>

DC-IN PCB

MODELAN-2

Holder

LAN Cable MODELAN

Holder

Modem Cable

I/O Plate

I/O PCB

<N19>

DC-IN PCB

Set the Core of the Modem 
over the DC-IN Cable.

DC-IN Cable

FAN Cable Sheet

0~3mm

0~3mm

Connect the Connector

Attach the Cable avoiding 
overlapping 
(DC-IN Cable and INV Cable).
Set the INV Cable under 
the DC IN Cable.

Safety Working

Turn the DC-IN Cable halfway 
(counterclockwise)

Safety Working

INV. Cable

Avoid runnning over the boss. 
(Otherwise the Cable will be caught 
at the Bottom Cabnet.)

Fix the Core using the Tape.

Safety Working

Fold back the end of Tape.

Summary of Contents for CF-74ECBGDBM



















































Reviews:

No comments

Related manuals for CF-74ECBGDBM

Brands by name

Popular brands

Load more brands