17
Getting Started
l
During setup of Windows, use the touchpad and clicking to
move the pointer and to click an item.
l
Setup of Windows will take approximately
5 minutes /
20 minutes.
Go to the next step, confirming each message on the dis
-
play.
l
You can set the Wireless Network after the setup of Win-
dows is complete.
If “Let’s get connected” is displayed, select
“Skip this step”.
“Join a wireless network” screen may not ap-
pear.
l
Follow the steps below.
A
When “Enable sensors” is displayed, click [Enable this
sensor].
B
When the [User Account Control] screen is displayed,
click [Yes].
C
At the [Display Rotation Tool] confirmation screen, click
[Yes].
The computer restarts automatically, and the setting is
enabled.
CAUTION
l
You can change the user name, password, image and secu-
rity setting after setup of Windows.
l
Remember your password. If you forget the password, you
cannot use Windows. Creating a password reset disk before-
hand is recommended.
l
Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and
the hyphen (-) character. If the error message “The computer
name is not valid” appears, check if characters other than
the above are not entered. If the error message still remains
on the display, set the key entry mode to English (“EN”) and
enter characters.
l
Do not use the following words and characters for user
name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9,
LPT1 to LPT9, LPT, &, space,
@.
l
In particular, if you create a user name (account name) that
includes the “@” mark, a password will be requested at the
log-on screen, even if no password has been set. If you try
to log on without entering a password, “The user name or
password is incorrect.” may be displayed and you will not be
able to log on to Windows (
è
page 33).
