background image

6

DOCUMENT CONVENTION

These operating instructions use the following convention when describing the use and operation of the camera.

Administration Software:

Panasonic Administration Software BM-ES300E (This software is sold separately, however, it must

be used in combination with iris cameras.)
This software is used for administering iris enrollment/recognition. The total number of users that can be enrolled differs
depending on the total license numbers of User License Software BM-EU30000E Series (This software is sold separately,
however, it must be used in combination with iris cameras.).

Distribution:

To transfer enrolled data from the iris server to iris cameras and to save the data in the cameras

Enrollment:

To save a user's iris data associated with the individual information (name and ID data, etc.) in the iris server

Iris data is enrolled using the administration software.

ID data:

The data, which is enrolled with each user’s information in an access control system with a card reader

Iris camera:

Panasonic Iris Camera BM-ET300

Iris data:

Data that are generated from captured iris images

Iris recognition:

Way to identify a person with iris patterns, which differ between each person

Iris server:

PC in which the following applications are installed

The iris server can administer all the iris cameras connected in the LAN.

• Administration Software (BM-ES300E)
• User License Software (BM-EU30000E Series)

Recognition:

To identify a user by comparing the iris data generated (from iris images captured) with the data enrolled in the

iris database

Server certification:

Certification carried out by the iris server when no corresponding iris data is found in iris cameras

The camera generates iris data from the iris images captured. Then, the iris data is transferred to the iris server in the LAN,
which carries out certification. The setting in the administration software will determine whether to carry out server certifica-
tion.

Setup cable:

Panasonic BM-ET300 Setup Cable

Setup PC:

PC in which the setup software is installed

Setup software:

Panasonic BM-ET300 Setup Software

User license software:

Panasonic User License Software BM-EU30000E Series that is required to enroll iris data

You need to purchase the software which supports the total number of users enrolled.

• For 100 users: BM-EU30100E
• For 1000 users: BM-EU31000E
• For 3000 users: BM-EU33000E
• For 5000 users: BM-EU35000E

Voice guidance:

One of the methods to guide the eyes of users to the capturing range

Voice guidance leads users with the voice output from the speaker of the iris camera.
The setting of voice guidance will be configured by the system administrator using Administration Software BM-ES300E.
The parameters are as follows. (Refer to system administrators for details on setting.)

• Guidance language can be selected from among 12 languages.
• Audio setting can be selected from "Mute” (Nothing is output.), "Simple” (Shutter sound and recognition result are out-

put.) and "Full” (Voice guidance, shutter sound, and recognition result are output.).

Wiegand:

Transmission protocol used as an access control system interface

Warning(s):

Warning statements identify conditions or practices that could result in severe injury or loss of life.

Caution(s):

Caution statements identify conditions or practices that could result in damage to this product or injury.

Note(s):

Note statements identify special instruction, rule, or side comment related to the topic.

Summary of Contents for BM-ET300

















Reviews: