Panasonic BBGT1500 - GLOBARANGE CORDLESS PHONE Operating Instructions Manual Download Page 78

Page: 78 / 112

Useful Information

For product assistance, visit www.panasonic.com/help

For

assistance, visit www.joip.com

Error!!

The handset’s registration has failed. Move
the handset and base unit away from all
electrical appliances and try again.

8 handsets have already been registered to
the base unit. A previously deregistered
handset number may still be retained in the
base unit. To register an additional handset,
erase an unnecessary handset number (page
75).

The software update of the base unit has
failed. Confirm that the IP line is not being
used, and try again (page 55).

Failed

The handset you tried to copy phonebook
items to is in use.

The handset you tried to copy phonebook
items to is out of area.

Incomplete

The destination handset’s phonebook
memory is full. Erase unnecessary items from
the destination handset’s phonebook (page
41).

Invalid. Please
register to the base
unit

The handset is not registered to the base unit.
Register the handset (page 75).

Invalid setting

The Internet connection settings are not
correct. Enter the correct settings (page 29).

joip message
Memory Empty

There are no

text messages (page 72).

Memory full

The message memory for the answering
system is full. Erase unnecessary messages
(page 59).

Memory full. Memory
limited to 8 MSGs.

The maximum number of

text messages

you can protect is 8. To release a protected
text message, see page 72.

Messages full

The message memory for the answering
system is full. Erase unnecessary messages
(page 59).

Display message

Cause/solution

GT15xx.book Page 78 Monday, June 4, 2007 8:52 AM

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

















































































































Search results

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

Reviews:

Related manuals for BBGT1500 - GLOBARANGE CORDLESS PHONE

Brands by name

Popular brands

Panasonic BBGT1500 - GLOBARANGE CORDLESS PHONE, Operating Instructions Manual

Search results

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

Reviews:

Related manuals for BBGT1500 - GLOBARANGE CORDLESS PHONE

Brands by name

Popular brands