Panasonic BBGT1500 - GLOBARANGE CORDLESS PHONE Operating Instructions Manual Download Page 85

Page: 85 / 112

Useful Information

For product assistance, visit www.panasonic.com/help

For

assistance, visit www.joip.com

*1 BB-GT1540

I cannot page the handset.

The paged handset is too far from the base
unit.

The paged handset is in use. Try again later.

I cannot page the base unit.

The base unit is in use. Try again later.

I cannot turn the clarity booster
on.

Other units are in use and the system is busy.
Try again later.

I cannot make long

distance calls.

Make sure that you have long distance
service.

I answered a call when

the phone rang, but the call
was disconnected.

The ringer may continue to sound for several
seconds after the caller hangs up because of
the time lag of the signal transmission.

During a conversation,

the following occurs:
– noise is heard.
– the sound is interrupted.
– the sound is delayed.

It may be caused by someone using a
computer connected to the same network as
the unit.

Confirm the speed of Internet connection. The
unit requires 100 kbps for each upstream and
downstream. If less than 100 kbps is
provided, visit www.joip.com or contact the

service provider.

Problem

Cause/solution

GT15xx.book Page 85 Monday, June 4, 2007 8:52 AM

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

















































































































Search results

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

Reviews:

Related manuals for BBGT1500 - GLOBARANGE CORDLESS PHONE

Brands by name

Popular brands

Panasonic BBGT1500 - GLOBARANGE CORDLESS PHONE, Operating Instructions Manual

Search results

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

Reviews:

Related manuals for BBGT1500 - GLOBARANGE CORDLESS PHONE

Brands by name

Popular brands