Panasonic BBGT1500 - GLOBARANGE CORDLESS PHONE Operating Instructions Manual Download Page 79

Page: 79 / 112

Useful Information

For product assistance, visit www.panasonic.com/help

For

assistance, visit www.joip.com

No items stored

Your phonebook or redial list is empty.

There is no downloaded data (phonebook
data, ringtone data, or

service menu

data) in the base unit.

The unit is not registered to the

service.

Check the connections (page 17) and confirm
the STATUS indicator lights in green (page
22).

No link to base. Move
closer to base, try
again.

The handset has lost communication with the
base unit. Move closer to the base unit, and
try again.

Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.

The handset’s registration may have been
canceled. Re-register the handset (page 75).

Phonebook Memory full

There is no space to store new items in the
phonebook. Erase unnecessary items (page
41).

Please lift up and try
again.

A handset button was pressed while the
handset was on the base unit or charger. Lift
the handset and press the button again.

Please read joip Terms
of Use. Agree?

You have not agreed to the Terms of Use for
the

services. To use the

IP line, you

need to agree to it using the handset (page
18).

Protected MSG is not
erasable.

The protected messages remain. All other
messages are erased.

This message contains
unrecognized
characters.

The characters the unit cannot recognize are
replaced with “_”.

*1 BB-GT1540

Display message

Cause/solution

GT15xx.book Page 79 Monday, June 4, 2007 8:52 AM

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

















































































































Search results

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

Reviews:

Related manuals for BBGT1500 - GLOBARANGE CORDLESS PHONE

Brands by name

Popular brands

Panasonic BBGT1500 - GLOBARANGE CORDLESS PHONE, Operating Instructions Manual

Search results

Summary of Contents for BBGT1500 - GLOBARANGE CORDLESS PHONE

Reviews:

Related manuals for BBGT1500 - GLOBARANGE CORDLESS PHONE

Brands by name

Popular brands