![background image](http://html.mh-extra.com/html/panasonic/bb-hnp15/bb-hnp15_operating-instructions-manual_259230008.webp)
Operating Instructions
8
1.2
Starting or Closing This Software
This software starts automatically when you boot up the PC.
•
is displayed in the notification area while this software is running.
Start
notification area
PC screen
Displayed in the
notification area.
Note
To not start this software automatically when booting up the PC, right-click
and uncheck [Start on bootup] from the menu.
1.2.1
Starting Operation Window
Double-click
on the desktop to start this software.
• Operation window of this software is displayed.
Note
• You can also start the operation window through the following procedures.
•
From the [Start] menu, select [All Programs]
→
[Network Camera Recorder
with Viewer Software]
→
[Network Camera Recorder with Viewer Software].
•
From Explorer, double-click [ncr3.exe] in the location where the software was
installed.
• These softwares cannot work at the same time. Use only a software.
• To use this software, perform the license registration.
If no license has been registered when the operation window is started,
[Register the license key] will be displayed. Follow the steps on page 10.