Panasonic BB-HGW700, Operating Instructions Manual

Page: 69 / 152

69 [For assistance, please call: 1-800-272-7033]
Operating Instructions
F
unctio
n
s
Packet Filtering
By specifying the IP address, port and protocol parameters, it is possible to either pass or intercept IP
packets that are being received. If the parameters are set effectively they can be used as a security
measure. Filtering is processed from the smallest entry no. up. For an explanation of each heading in
filtering, see below.
Notes
• You must click [Save] after setting the filtering parameters.
Data Entry Field
1.
Click [Packet Filtering] on the security setup
page.
2.
Click Add under the Operation heading.
3.
Set the necessary headings and click [Add].
4.
When setup is complete, click [Save].
• The entered information is saved.
5.
When [Restart] is displayed on the setup page,
click it.
No. Select an entry no. between 1 and 64. Packet filtering is processed from the
smallest entry no. up. If an entry is already registered, it will be overwritten
by the new entry.
Operation Click Add to add a new filtering setting. To modify or delete a filtering setting
click Modify/Delete. The setup page will open and you can add, modify or
delete settings by entering the data and clicking the appropriate button.
Entry Enable or Disable this entry.