Panasonic BB-HGW700 Operating Instructions Manual Download

Page: 26 / 152

Operating Instructions

Notes

•

When registering or editing, restart all PCs connected to the LAN (home) side.

•

When adding more PCs after setup has been completed, connect the new PCs to jacks
LAN1 to LAN4 and then restart.

When setup is complete, click [Save and Go to
Connection Mode].

•

The connection mode page is displayed.

Select the ISP entered in step 4.

When setup is complete, click [Save].

•

The entered information is saved.

Note

When saving, do not cut the power supply. If cut, saving might not be completed successfully.

When [Restart] is displayed on the setup page,
click it.

10.

Restart the PC.

•

Check that the PC is connected to the
Internet. (see page 37)

Summary of Contents for BB-HGW700

























































































































































Search results

Summary of Contents for BB-HGW700

Reviews:

Related manuals for BB-HGW700

Brands by name

Popular brands

Panasonic BB-HGW700, Operating Instructions Manual

Search results

Summary of Contents for BB-HGW700

Reviews:

Related manuals for BB-HGW700

Brands by name

Popular brands