background image

39

Camera menu items

(continued)

Day/Night [Day, Night, Auto]

This is used to select normal shooting or low light shooting 
(by exposing the subjects to infrared rays).

Day:

  Normal shooting

Night:

  Low light shooting

Auto:

   Automatically switch between standard shooting 

and night-vision shooting depending on the 
lighting conditions of the subject and shooting 
location.

 

In Night mode, Black-and-white images are output. 
The lens iris is forcibly set to open.

 

In Night mode, the white balance adjustment cannot 
be used.

 

When focus is set to manual, the focus may shift 
when switching between Day and Night mode, 
depending on the shooting conditions.  If necessary, 
either adjust the focus or set the focus to auto.

 

Even when “Auto” is selected, shooting may not 
switch between Day and Night mode as expected, 
depending on the subject. 
In such cases, perform the following adjustments.

Switching from Day mode to Night mode

   Switch when the gain value and frame storage 

value are at their maximum due to brightness 
adjustment.

   When the shooting mode (Scene) is “Manual1” 

to “Manual3”, you can adjust the AGC Max Gain 
and Auto F.Mix Max Gain settings.

Switching from Night mode to Day mode

   You can adjust with the Night-Day Level setting.
If you perform a close-up on a black object, the unit 
may switch to Night mode, even after performing the 
above adjustments.

Notes

Night‑Day Level [Low, Mid, High]

Adjust the level used while switching from Night mode to 
Day mode when Day/Night is set to “Auto”. 
This can only be configured when “Day/Night” is set to 
“Auto”.

Return

Use this to return to the previous menu.

Summary of Contents for AW-UE70WP

















































































































































Reviews: