background image

27

Operating  Instructions

 indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

 DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to 
persons.
The exclamation point within an equilateral 
triangle is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

Read this first! 

(For AW-UE70WP, AW-UE70KP)

WARNING:

Always keep memory cards (optional accessory) or 
accessories (mounting screws) out of the reach of 
babies and small children.

WARNING:

•   To reduce the risk of fire or electric shock, do not 

expose this equipment to rain or moisture.

•   To reduce the risk of fire or electric shock, keep this 

equipment away from all liquids. Use and store only 
in locations which are not exposed to the risk of 
dripping or splashing liquids, and do not place any 
liquid containers on top of the equipment.

CAUTION:

To reduce the risk of fire or electric shock and 
annoying interference, use the recommended 
accessories only.

CAUTION:

In order to maintain adequate ventilation, do not 
install or place this unit in a bookcase, built-in cabinet 
or any other confined space. To prevent risk of electric 
shock or fire hazard due to overheating, ensure that 
curtains and any other materials do not obstruct the 
ventilation.

CAUTION:

The mains plug of the power supply cord shall remain 
readily operable.
The AC receptacle (mains socket outlet) shall be 
installed near the equipment and shall be easily 
accessible. To completely disconnect this equipment 
from the AC mains, disconnect the power cord plug 
from the AC receptacle.

CAUTION:

Check the installation at least once a year.
An improper installation could cause the unit to fall off 
resulting in personal injury.

CAUTION:

Do not pick up and move the unit while the tripod is 
attached.
The fitting may break under the weight of the tripod, 
which may result in injury.

CAUTION:

This apparatus can be operated at a voltage in the 
range of 100 – 240 V AC.
Voltages other than 120 V are not intended for U.S.A. 
and Canada.
Operation at a voltage other than 120 V AC may 
require the use of a different AC plug. Please contact 
either a local or foreign Panasonic authorized service 
center for assistance in selecting an alternate AC 
plug.

Conforms to UL STD 60065.
Certified to CAN/CSA STD C22.2 No.60065.

Installation  Instructions

Summary of Contents for AW-UE70KP

























































Reviews: